Yard risk and road risk live in different tools
Depot cameras, telematics, and dashcams each tell a partial story — nobody owns the full risk picture per driver or per site.
Logistics & Mobility
Fleet & Ground Operations Solutions
One governed platform from the depot to the road: yard and loading safety, gate security, and walkway discipline on-site — extended into driver behavior and fatigue with DriveSense.
Why now
The problems your cameras already see
Insurance costs climb with every open question
Without evidence, every claim is contested and every renewal is priced against you.
Driver coaching runs on anecdotes
Harsh events, fatigue, and distraction are discussed in reviews — without the data or the clip to change behavior.
20–40%
fewer harsh driving events
typical DriveSense pilot target
Minutes
to claims-ready evidence
sealed clips from cab and yard
Per driver
risk scored continuously
insurer-ready reporting built in
Typical pilot targets agreed with fleet & ground operations teams before deployment — measured on your cameras, in your environment.
Use cases
What you can run on day one
Every use case runs on the cameras you already own — deployed in days, governed by deterministic rules, and backed by sealed, audit-grade evidence.
Depot & yard safety
Vehicle–person conflicts and reversing events caught in real time.
Loading & unloading
Bay dwell time and unsafe loading practices measured and flagged.
Gate & access security
Every entry and exit logged with visual evidence.
Walkway compliance
Pedestrian routes enforced across the yard.
Driver behavior (DriveSense)
Fatigue, distraction, and harsh events scored on the same platform.
Claims-ready evidence
Sealed clips for incidents, disputes, and insurer reviews.
See a rule in plain English
Pick a use case and watch the rule that runs it — this is the entire configuration. No training data, no data-science team.
Fleet & Ground Operations · rule editor
YARD LEAD PAGED · CLIP SEALED ✓Live in seconds — no training data, no model tuning.
Deployment
From your cameras to governed evidence
Connect existing cameras
CamEdge runs on-prem GPU inference against your current CCTV — no rip-and-replace, resilient to limited connectivity.
Write rules in plain English
A deterministic rules engine enforces your policies — updated in minutes as operations change, with zero model retraining.
Act on sealed evidence
Every event lands in CamCore with an annotated clip and AI-written explanation — routed to your teams, ready for auditors.
In fleet & ground operations: DriveSense in-cab inference devices and yard cameras feed the same evidence platform and the same risk score.
Compliance
Built for the rules you answer to
Camera AI in fleet & ground operations sits under real regulatory obligations across the GCC, ASEAN, and the EU. Camnitive is designed to satisfy them — with evidence, not assurances.
EUAI governance
EU AI Act
Regulation (EU) 2024/1689
High-risk rules enforceable Aug 2, 2026
The Conformity Pack maps every applicable obligation to platform evidence — sealed logs, model documentation, oversight workflows — with a live conformity score in the dashboard.
EUData protection
GDPR
Regulation (EU) 2016/679
Processing stays on-premises, no biometrics by default, retention is policy-driven, and DPIA-ready documentation ships with the Conformity Pack.
GCCData protection
Saudi PDPL
Personal Data Protection Law (SDAIA)
Sovereign deployment keeps processing and evidence inside the Kingdom; nothing crosses the border by design.
GCCData protection
UAE PDPL
Federal Decree-Law No. 45 of 2021
In-country processing with policy-driven retention; free-zone regimes (DIFC, ADGM) are covered in the same mapping.
ASEANData protection
Singapore PDPA
Personal Data Protection Act 2012
Purpose-scoped rules and on-prem processing align with PDPC advisory guidelines; evidence access is logged end to end.
EUWorkplace safety
EU OSH Framework Directive
Directive 89/391/EEC
Continuous PPE, zone, and proximity enforcement with sealed evidence — prevention you can demonstrate, not just declare.
Fleet & Ground Operations
Recommended Pilot Package
Start with 10–50 of your existing cameras, prove value in weeks, and grow the same deployment into your operations system of record.
Pilot goal
Prove depot safety, yard discipline, and gate security at one depot — on your existing cameras, with a roadmap into DriveSense driver behavior on the same platform.
Suggested scope
- Yard crossings and reversing areas (vehicle–person conflicts)
- Loading bays (dwell time and unsafe-practice detection)
- Gates and access points (entry/exit events with evidence)
- Pedestrian walkways and after-hours zones
What we configure
- Plain-English yard-safety and walkway rules per zone and shift
- Conflict-point ROIs and time-in-zone thresholds for reversing areas
- Alert routing for depot managers, safety leads, and security
- CamCore claims-ready evidence records for incidents and disputes
Success metrics
- Measurable reduction in yard conflicts and walkway violations
- Bay dwell-time baselines for every loading position in scope
- Sealed evidence for incidents, claims, and insurer conversations
Prefer to build the case yourself first? Four self-serve tools, no signup required:
ROI Calculator
A savings estimate seeded with fleet & ground operations defaults — tune it to your numbers.
Use-Case Library
Every rule we run in fleet & ground operations, with plain-English examples.
Policy Pack Generator
Draft camera policies and SOPs for your jurisdictions as a branded PDF.
Pilot Planner
Scope cameras, sites, use cases, and deployment model in minutes.
FAQ
Frequently asked questions
Answers to the questions fleet & ground operations teams ask most about deploying Camnitive — from camera requirements to compliance evidence.
The pilot covers your depots, yards, and gates on fixed cameras you already own. In-vehicle driver behavior, fatigue, and collision intelligence arrive with DriveSense — on the same governed platform, so depot and road safety share one system of record.
Every yard incident, near-miss, and gate event is sealed with time-stamped visual evidence — so disputes are settled on facts, fraudulent claims are defensible, and insurers see documented, continuous risk reduction rather than promises.
Yes. Bay rules cover dwell time, unsafe loading practices, and walkway discipline in the same deployment — so operations gets throughput data from the cameras that safety justified.
Yes. Every rule supports schedules and shift windows — peak-hour yard rules, relaxed maintenance windows, and hardened after-hours security — all written in plain English and updated in minutes.
On-prem at each depot. CamEdge processes video locally and only events sync to CamCore, which can run in the cloud or in-country — supporting the Saudi and UAE PDPL, ASEAN privacy laws, and EU AI Act obligations.
10–50 cameras at one depot covering yard crossings, loading bays, gates, and walkways — live in days, evaluated on conflict reduction and evidence quality, then rolled out across the depot network with the same rule templates.
Logistics & Mobility
More in this pillar
Flow, safety, and security wherever goods, vehicles, and people move.
Deployed in days. Resident in-country. Auditable end-to-end.
On the cameras you already own. Start with a 10–50 camera pilot, see measurable ROI in weeks, and grow it into your operations system of record.
Certified System IntegratorsTelco White-LabelVMS EcosystemsOEM Installed Base