Terminal equipment operates at lethal scale
Straddle carriers, reach stackers, and terminal tractors move faster than people can react — proximity rules exist on paper.
Logistics & Mobility
Ports Solutions
Bring governed visual intelligence to quays, yards, and gates: heavy-equipment proximity, restricted berth zones, PPE, and container-flow analytics — while video stays inside your port estate.
Why now
The problems your cameras already see
ISPS obligations demand evidence on demand
Security incidents, restricted-area breaches, and access events must be documented — manual clip hunts do not scale.
Gate congestion is measured by complaint
Truck queues and turn times are known only when carriers escalate — the data to fix flow was never collected.
40–60%
fewer quay and yard proximity events
typical pilot target
15–25%
faster gate turn times
from continuous queue analytics
Hours
to compile ISPS evidence
sealed records aligned to port security duties
Typical pilot targets agreed with ports teams before deployment — measured on your cameras, in your environment.
Use cases
What you can run on day one
Every use case runs on the cameras you already own — deployed in days, governed by deterministic rules, and backed by sealed, audit-grade evidence.
Quay & yard proximity
Keep people clear of straddle carriers, reach stackers, and terminal tractors.
Restricted berth zones
Enforce exclusion areas around active cranes and mooring operations.
Gate & queue analytics
Truck queue, turn time, and gate-flow measurement from existing cameras.
PPE compliance
Vest and helmet verification across terminal work areas.
Container handling events
Dwell, staging, and abnormal handling flagged with sealed evidence.
Perimeter & ISPS security
Intrusion detection aligned with port security obligations.
See a rule in plain English
Pick a use case and watch the rule that runs it — this is the entire configuration. No training data, no data-science team.
Ports · rule editor
TERMINAL OPS PAGED · CLIP SEALED ✓Live in seconds — no training data, no model tuning.
Deployment
From your cameras to governed evidence
Connect existing cameras
CamEdge runs on-prem GPU inference against your current CCTV — no rip-and-replace, resilient to limited connectivity.
Write rules in plain English
A deterministic rules engine enforces your policies — updated in minutes as operations change, with zero model retraining.
Act on sealed evidence
Every event lands in CamCore with an annotated clip and AI-written explanation — routed to your teams, ready for auditors.
In ports: Reads a parallel stream from terminal CCTV without touching the certified ISPS recording chain.
Compliance
Built for the rules you answer to
Camera AI in ports sits under real regulatory obligations across the GCC, ASEAN, and the EU. Camnitive is designed to satisfy them — with evidence, not assurances.
EUAI governance
EU AI Act
Regulation (EU) 2024/1689
High-risk rules enforceable Aug 2, 2026
The Conformity Pack maps every applicable obligation to platform evidence — sealed logs, model documentation, oversight workflows — with a live conformity score in the dashboard.
EUCritical infrastructure & cyber
NIS2 Directive
Directive (EU) 2022/2555
CamEdge runs on your network segment, air-gap ready, with no inbound cloud dependency — camera analytics without expanding your attack surface.
ASEANCritical infrastructure & cyber
Singapore Cybersecurity Act
Cybersecurity Act 2018 (CII regime)
On-prem analytics on a segregated segment — no new external dependencies on CII networks.
GCCCritical infrastructure & cyber
NCA Essential Cybersecurity Controls
NCA ECC-1:2018
Fully on-premises deployment with air-gap support fits ECC network segregation — no cloud dependency, no external data path.
ASEANWorkplace safety
Workplace Safety and Health Act
WSH Act (Cap. 354A)
Continuous enforcement of PPE, zones, and vehicle rules with sealed evidence that stands up in WSH investigations.
GCCWorkplace safety
Saudi OSH Regulations
MHRSD Occupational Safety & Health framework
Around-the-clock PPE and hazard-zone enforcement with audit-grade evidence for MHRSD inspections.
Ports
Recommended Pilot Package
Start with 10–50 of your existing cameras, prove value in weeks, and grow the same deployment into your operations system of record.
Pilot goal
Prove quay and yard proximity, restricted berth zones, and gate analytics at one terminal — inside your port estate, on the cameras already watching it, with ISPS-aligned evidence.
Suggested scope
- Quay cranes and yard equipment corridors (person–equipment proximity)
- Active berths and mooring operations (exclusion enforcement)
- Gates and queue lanes (truck turn time, gate flow)
- ISPS perimeter and restricted areas (intrusion with evidence)
What we configure
- Plain-English proximity and berth-zone rules tied to vessel operations and shifts
- CamEdge on-prem inference — video never leaves the port estate
- Escalation paths for terminal control, HSE, and port security
- CamCore evidence records aligned to ISPS and port-authority reporting
Success metrics
- Faster time-to-awareness for proximity and berth-zone breaches
- Gate turn-time and queue baselines from existing cameras
- Sealed evidence for every safety and security exception in scope
Prefer to build the case yourself first? Four self-serve tools, no signup required:
ROI Calculator
A savings estimate seeded with ports defaults — tune it to your numbers.
Use-Case Library
Every rule we run in ports, with plain-English examples.
Policy Pack Generator
Draft camera policies and SOPs for your jurisdictions as a branded PDF.
Pilot Planner
Scope cameras, sites, use cases, and deployment model in minutes.
FAQ
Frequently asked questions
Answers to the questions ports teams ask most about deploying Camnitive — from camera requirements to compliance evidence.
Yes — that is the default architecture. CamEdge processes video on-prem inside your estate, and only events and sealed evidence move to CamCore, which itself can run fully in-country. Nothing depends on shipping video to someone else's cloud.
The detection models are built for outdoor industrial CCTV, and the deterministic rules layer adds thresholds and cooldowns per zone. During the pilot we tune zones against your real conditions — quay lighting, weather, container shadows — before scaling.
Perimeter, restricted-area, and access events are recorded with sealed, time-stamped evidence and AI-written narratives — a continuous, auditable record that supports ISPS compliance reviews and port-authority reporting rather than a manual logbook.
Yes. The cameras enforcing safety at your gates also feed queue-length, turn-time, and gate-flow analytics — so the deployment pays back in terminal throughput as well as safety.
Quay and yard proximity, restricted berth zones, and PPE at the highest-risk interaction points — then gate analytics, container-dwell measurement, and perimeter security on the same infrastructure.
Not disruptive: CamEdge connects to existing camera streams — no crane downtime, no new cabling on the quay. Pilots of 10–50 cameras go live in days, and rules are adjusted in minutes as operations change.
Logistics & Mobility
More in this pillar
Flow, safety, and security wherever goods, vehicles, and people move.
Deployed in days. Resident in-country. Auditable end-to-end.
On the cameras you already own. Start with a 10–50 camera pilot, see measurable ROI in weeks, and grow it into your operations system of record.
Certified System IntegratorsTelco White-LabelVMS EcosystemsOEM Installed Base