Heavy vehicles and people share the same ground
Haul trucks, loaders, and dozers have lethal blind spots — and near-misses go unreported until one becomes a fatality inquiry.
Industrial Operations
Mining Solutions
Bring governed visual intelligence to pits, plants, and processing: heavy-vehicle proximity, exclusion zones, PPE, and conveyor monitoring on the cameras already watching your operation — with evidence that stands up to regulators.
Why now
The problems your cameras already see
Regulators want proof, not policies
Mining inspectors expect demonstrable enforcement of exclusion zones and PPE — paper programs no longer pass.
Remote sites, thin supervision
Pits and processing plants run around the clock in places supervisors rarely reach — what happens on night shift stays invisible.
5–10×
more near-misses surfaced
events no one previously reported
30–50%
fewer exclusion-zone breaches
typical pilot target on covered zones
Hours
to answer an inspector
sealed evidence, ready to export
Typical pilot targets agreed with mining teams before deployment — measured on your cameras, in your environment.
Use cases
What you can run on day one
Every use case runs on the cameras you already own — deployed in days, governed by deterministic rules, and backed by sealed, audit-grade evidence.
Vehicle–person proximity
Alerts when workers come inside the danger envelope of haul trucks, loaders, and dozers.
Blast & exclusion zones
Deterministic enforcement of exclusion perimeters before and during blasting windows.
PPE & fatigue indicators
Helmet, vest, and eyewear verification at access points and active faces.
Conveyor & crusher monitoring
Detect blockages, spillage, and unauthorized access along conveyors and crushers.
Environmental & tailings watch
Visual monitoring of tailings, discharge points, and dust events with sealed evidence.
Equipment state & idle time
Track equipment utilization and abnormal states across the site.
See a rule in plain English
Pick a use case and watch the rule that runs it — this is the entire configuration. No training data, no data-science team.
Mining · rule editor
DISPATCH ALERTED · CLIP SEALED ✓Live in seconds — no training data, no model tuning.
Deployment
From your cameras to governed evidence
Connect existing cameras
CamEdge runs on-prem GPU inference against your current CCTV — no rip-and-replace, resilient to limited connectivity.
Write rules in plain English
A deterministic rules engine enforces your policies — updated in minutes as operations change, with zero model retraining.
Act on sealed evidence
Every event lands in CamCore with an annotated clip and AI-written explanation — routed to your teams, ready for auditors.
In mining: Built for remote pits: CamEdge runs fully offline at site and syncs events when connectivity returns.
Compliance
Built for the rules you answer to
Camera AI in mining sits under real regulatory obligations across the GCC, ASEAN, and the EU. Camnitive is designed to satisfy them — with evidence, not assurances.
EUAI governance
EU AI Act
Regulation (EU) 2024/1689
High-risk rules enforceable Aug 2, 2026
The Conformity Pack maps every applicable obligation to platform evidence — sealed logs, model documentation, oversight workflows — with a live conformity score in the dashboard.
GCCWorkplace safety
Saudi OSH Regulations
MHRSD Occupational Safety & Health framework
Around-the-clock PPE and hazard-zone enforcement with audit-grade evidence for MHRSD inspections.
ASEANWorkplace safety
Indonesia SMK3
PP No. 50/2012 (OSH management systems)
Continuous camera-based monitoring generates the documented, verifiable safety records SMK3 audits expect.
ASEANWorkplace safety
Malaysia OSHA
OSHA 1994 (2022 amendment)
Camera-based hazard monitoring turns your risk assessments into continuously enforced, evidenced controls.
ASEANWorkplace safety
Philippines OSH Law
RA 11058 & DOLE D.O. 198-18
Continuous PPE and hazard enforcement produces the documented safety program evidence DOLE expects.
EUESG & reporting
CSRD
Directive (EU) 2022/2464
Safety events become audit-grade, timestamped records — incident and near-miss metrics your auditors can actually verify.
Mining
Recommended Pilot Package
Start with 10–50 of your existing cameras, prove value in weeks, and grow the same deployment into your operations system of record.
Pilot goal
Prove heavy-vehicle proximity, exclusion-zone, and PPE detection at one pit or plant — on the ruggedized cameras you already run, offline-tolerant for remote sites, with evidence your regulator will accept.
Suggested scope
- Haul roads and interaction zones (vehicle–person proximity)
- Blast perimeters and restricted areas (exclusion enforcement)
- Access points and active faces (PPE verification)
- Conveyors, crushers, and tailings points (blockage, spillage, intrusion)
What we configure
- Plain-English exclusion and proximity rules per zone, tied to blast windows and shift schedules
- CamEdge on-site inference with offline buffering for limited-connectivity pits
- Severity tiers and escalation to control room, dispatch, and HSE
- CamCore evidence packs aligned to mine-safety regulatory reporting
Success metrics
- Faster time-to-awareness for proximity and exclusion-zone breaches
- Detection continuity through connectivity outages
- Audit-ready evidence for every safety exception, by zone and shift
- Baseline of repeat hotspots to target in the full rollout
Prefer to build the case yourself first? Four self-serve tools, no signup required:
ROI Calculator
A savings estimate seeded with mining defaults — tune it to your numbers.
Use-Case Library
Every rule we run in mining, with plain-English examples.
Policy Pack Generator
Draft camera policies and SOPs for your jurisdictions as a branded PDF.
Pilot Planner
Scope cameras, sites, use cases, and deployment model in minutes.
FAQ
Frequently asked questions
Answers to the questions mining teams ask most about deploying Camnitive — from camera requirements to compliance evidence.
Your existing fixed cameras work. CamEdge runs GPU inference on-site against standard RTSP streams — including ruggedized and thermal cameras already watching haul roads, crushers, and conveyors. No rip-and-replace.
No. CamEdge is offline-tolerant by design: proximity, exclusion-zone, and PPE detection continues through outages, events buffer locally, and everything syncs to CamCore when the connection returns.
Yes. Exclusion perimeters can be tied to blast windows, and every rule supports schedules — so a zone that is open during maintenance can be hard-enforced during operations, without touching a model.
Camnitive complements proximity-detection hardware on vehicles by covering the fixed-camera view: interaction zones, walkways, conveyors, and areas vehicles-mounted systems cannot see — and it turns every event into sealed, reviewable evidence rather than a beep in a cab.
Every event carries a time-stamped annotated clip and an AI-written explanation in your own HSE policy language. CamCore assembles conformity packs for mine-safety regulators, insurers, and internal investigations — the answer when they say “prove it.”
Video is processed on-site and stays in-country. CamCore can run cloud-hosted or fully in-country, supporting GCC data-protection laws such as the Saudi and UAE PDPL, ASEAN privacy laws, and the EU AI Act and GDPR.
Industrial Operations
More in this pillar
Safety, compliance, and process integrity across plants, sites, and heavy operations.
Deployed in days. Resident in-country. Auditable end-to-end.
On the cameras you already own. Start with a 10–50 camera pilot, see measurable ROI in weeks, and grow it into your operations system of record.
Certified System IntegratorsTelco White-LabelVMS EcosystemsOEM Installed Base