Safety depends on who happens to be watching
Supervisors cannot watch every line on every shift — PPE lapses and zone breaches surface only after an incident report is filed.
Industrial Operations
Manufacturing Solutions
Turn factory cameras into audit-grade safety and compliance coverage: PPE detection, restricted zones, line stoppages, and housekeeping — deployed on your existing CCTV in days.
Why now
The problems your cameras already see
Audit preparation eats weeks of skilled time
EHS and quality evidence is assembled by hand from scattered footage, spreadsheets, and memory — every single audit cycle.
CCTV records incidents but never prevents them
Your cameras see every violation and near-miss. Nobody reviews the footage until something has already gone wrong.
30–50%
fewer PPE and zone violations
measured within the pilot window
80%+
less manual footage review
alerts replace hours of scrubbing
Hours
to produce audit evidence
instead of weeks of preparation
Typical pilot targets agreed with manufacturing teams before deployment — measured on your cameras, in your environment.
Use cases
What you can run on day one
Every use case runs on the cameras you already own — deployed in days, governed by deterministic rules, and backed by sealed, audit-grade evidence.
PPE compliance
Continuous verification of helmets, vests, and gloves on the plant floor.
Restricted zones
Instant alerts when people enter machine cells or hazardous areas.
Line stoppage detection
Catch stopped lines and starved stations the moment they happen.
Packaging verification
Visual checks on labeling, palletizing, and end-of-line quality.
Housekeeping & 5S
Automated audits of blocked aisles, spills, and workplace organization.
Compliance scorecards
Audit-grade evidence and trends for EHS and quality teams.
See a rule in plain English
Pick a use case and watch the rule that runs it — this is the entire configuration. No training data, no data-science team.
Manufacturing · rule editor
LINE LEAD NOTIFIED · CLIP SEALED ✓Live in seconds — no training data, no model tuning.
Deployment
From your cameras to governed evidence
Connect existing cameras
CamEdge runs on-prem GPU inference against your current CCTV — no rip-and-replace, resilient to limited connectivity.
Write rules in plain English
A deterministic rules engine enforces your policies — updated in minutes as operations change, with zero model retraining.
Act on sealed evidence
Every event lands in CamCore with an annotated clip and AI-written explanation — routed to your teams, ready for auditors.
In manufacturing: CamEdge sits on the plant network beside your VMS — no production VLAN changes and no cloud dependency on the line.
Compliance
Built for the rules you answer to
Camera AI in manufacturing sits under real regulatory obligations across the GCC, ASEAN, and the EU. Camnitive is designed to satisfy them — with evidence, not assurances.
EUAI governance
EU AI Act
Regulation (EU) 2024/1689
High-risk rules enforceable Aug 2, 2026
The Conformity Pack maps every applicable obligation to platform evidence — sealed logs, model documentation, oversight workflows — with a live conformity score in the dashboard.
EUWorkplace safety
EU OSH Framework Directive
Directive 89/391/EEC
Continuous PPE, zone, and proximity enforcement with sealed evidence — prevention you can demonstrate, not just declare.
EUData protection
GDPR
Regulation (EU) 2016/679
Processing stays on-premises, no biometrics by default, retention is policy-driven, and DPIA-ready documentation ships with the Conformity Pack.
GCCWorkplace safety
Saudi OSH Regulations
MHRSD Occupational Safety & Health framework
Around-the-clock PPE and hazard-zone enforcement with audit-grade evidence for MHRSD inspections.
ASEANWorkplace safety
Workplace Safety and Health Act
WSH Act (Cap. 354A)
Continuous enforcement of PPE, zones, and vehicle rules with sealed evidence that stands up in WSH investigations.
ASEANWorkplace safety
Malaysia OSHA
OSHA 1994 (2022 amendment)
Camera-based hazard monitoring turns your risk assessments into continuously enforced, evidenced controls.
Manufacturing
Recommended Pilot Package
Start with 10–50 of your existing cameras, prove value in weeks, and grow the same deployment into your operations system of record.
Pilot goal
Deployed in days, not weeks — validate alert quality, compliance evidence, and operational workflows in one facility, with zero training data and no per-site model tuning.
Suggested scope
- High-impact production lines (PPE, line stoppage, packaging verification)
- Staging, WIP, and receiving zones (housekeeping/5S, inventory movement)
- Restricted and hazard areas (zone violations with evidence)
- Entrances or perimeter (after-hours exceptions)
What we configure
- Plain-English rules per zone, shift schedules, thresholds, and cooldowns
- Severity tiers (informational vs urgent)
- Alert routing (ops/quality/EHS) and acknowledgment workflow
- Baseline compliance reporting (exceptions by zone and shift)
Success metrics
- Alert precision and volume within agreed thresholds
- Time-to-acknowledge improvement vs baseline
- Audit-ready evidence trail for every safety and quality exception
- Identified hotspot zones and repeat exception patterns
Prefer to build the case yourself first? Four self-serve tools, no signup required:
ROI Calculator
A savings estimate seeded with manufacturing defaults — tune it to your numbers.
Use-Case Library
Every rule we run in manufacturing, with plain-English examples.
Policy Pack Generator
Draft camera policies and SOPs for your jurisdictions as a branded PDF.
Pilot Planner
Scope cameras, sites, use cases, and deployment model in minutes.
FAQ
Frequently asked questions
Answers to the questions manufacturing teams ask most about deploying Camnitive — from camera requirements to compliance evidence.
No. Camnitive works on the CCTV cameras you already own (typical RTSP environments) and runs alongside your current VMS/NVR — no rip-and-replace.
Pilots of 10–50 cameras deploy in days, not weeks. You write rules in plain English — no training data, no annotation projects, and no per-site model tuning.
Yes. Rules can be configured per camera and per zone (ROI), including thresholds, cooldowns, and shift schedules — so PPE, restricted-zone, and packaging policies can differ by area.
A deterministic rules engine — not a black box — decides what fires. Zoning (ROIs), schedules, minimum-duration thresholds, and cooldowns keep alerts focused on meaningful exceptions.
Every event carries time-stamped visual evidence and an AI-written explanation in your own policy language. CamCore assembles these into conformity packs and compliance scorecards you can hand to regulators, insurers, and brand auditors.
Yes. CamEdge runs inference on-prem and video stays in-country — the AI explanation layer included. This supports EU AI Act and GDPR obligations, GCC data-protection laws such as the Saudi and UAE PDPL, and ASEAN privacy laws. Synchronization to CamCore is configured to your network and security policies.
PPE and restricted-zone monitoring, line stoppage detection, and packaging verification in targeted areas — then add process analytics, QA workflows, and compliance scorecards on the same cameras.
Plants typically target fewer recordable incidents through continuous PPE and restricted-zone enforcement — and every event leaves defensible evidence. Safety leaders bring the trend reports and conformity packs into insurer reviews, ISO 45001 audits, and customer or brand audits, replacing self-reported checklists with a verifiable record.
Industrial Operations
More in this pillar
Safety, compliance, and process integrity across plants, sites, and heavy operations.
Deployed in days. Resident in-country. Auditable end-to-end.
On the cameras you already own. Start with a 10–50 camera pilot, see measurable ROI in weeks, and grow it into your operations system of record.
Certified System IntegratorsTelco White-LabelVMS EcosystemsOEM Installed Base