Estates sprawl faster than staffing
Plazas, bridges, depots, and plant rooms multiply — patrol coverage and budgets do not.
Intelligent Facilities
Public Infrastructure Solutions
Stations, bridges, plants, and public venues: crowd density and flow, traffic and pedestrian safety, intrusion detection, and asset-condition monitoring — sovereign by design, with data that never leaves your jurisdiction.
Why now
The problems your cameras already see
Enforcement fails without evidence
Vandalism, dumping, and unauthorized access go unprosecuted because the record is missing or unusable.
Critical assets get attention after the incident
Intrusion at substations, plant rooms, and control points is systematically under-detected until something fails.
Seconds
to detect intrusion
at critical assets, around the clock
Minutes
to enforcement-grade evidence
sealed records for police and prosecutors
70%
fewer patrol hours on covered assets
typical pilot target
Typical pilot targets agreed with public infrastructure teams before deployment — measured on your cameras, in your environment.
Use cases
What you can run on day one
Every use case runs on the cameras you already own — deployed in days, governed by deterministic rules, and backed by sealed, audit-grade evidence.
Crowd density & flow
Live occupancy and surge detection in stations and venues.
Traffic & pedestrian safety
Conflict points and risky crossings identified and trended.
Perimeter & intrusion
Critical assets protected with continuous visual coverage.
Vandalism & incident evidence
Sealed records for enforcement and claims.
Restricted zones
Track beds, plant rooms, and hazardous areas enforced.
Asset condition watch
Visual anomalies on public assets caught early.
See a rule in plain English
Pick a use case and watch the rule that runs it — this is the entire configuration. No training data, no data-science team.
Public Infrastructure · rule editor
CITY OPS ALERTED · PLATE LOGGEDLive in seconds — no training data, no model tuning.
Deployment
From your cameras to governed evidence
Connect existing cameras
CamEdge runs on-prem GPU inference against your current CCTV — no rip-and-replace, resilient to limited connectivity.
Write rules in plain English
A deterministic rules engine enforces your policies — updated in minutes as operations change, with zero model retraining.
Act on sealed evidence
Every event lands in CamCore with an annotated clip and AI-written explanation — routed to your teams, ready for auditors.
In public infrastructure: Sovereign deployment for government estates — processing and evidence stay in-country by design.
Compliance
Built for the rules you answer to
Camera AI in public infrastructure sits under real regulatory obligations across the GCC, ASEAN, and the EU. Camnitive is designed to satisfy them — with evidence, not assurances.
EUAI governance
EU AI Act
Regulation (EU) 2024/1689
High-risk rules enforceable Aug 2, 2026
The Conformity Pack maps every applicable obligation to platform evidence — sealed logs, model documentation, oversight workflows — with a live conformity score in the dashboard.
EUCritical infrastructure & cyber
NIS2 Directive
Directive (EU) 2022/2555
CamEdge runs on your network segment, air-gap ready, with no inbound cloud dependency — camera analytics without expanding your attack surface.
EUData protection
GDPR
Regulation (EU) 2016/679
Processing stays on-premises, no biometrics by default, retention is policy-driven, and DPIA-ready documentation ships with the Conformity Pack.
EUVideo surveillance
EDPB Video Devices Guidelines
EDPB Guidelines 3/2019
Every rule is scoped to a declared purpose, evidence access is role-based and audit-logged, and retention is enforced automatically.
GCCVideo surveillance
Saudi Surveillance Camera Law
Security Surveillance Camera Law (2022)
Camnitive turns the cameras the law already requires into an intelligence layer — with sealed, access-controlled evidence that satisfies retention rules.
ASEANCritical infrastructure & cyber
Vietnam Cybersecurity Law
Law No. 24/2018/QH14
Sovereign on-prem architecture satisfies localization by design — nothing to localize because nothing leaves.
Public Infrastructure
Recommended Pilot Package
Start with 10–50 of your existing cameras, prove value in weeks, and grow the same deployment into your operations system of record.
Pilot goal
Prove crowd-density, intrusion, and asset-condition monitoring at 2–3 sites — sovereign by design, with video and data that never leave your jurisdiction.
Suggested scope
- Stations, venues, or public spaces (crowd density and surge)
- Critical-asset perimeters (intrusion with sealed evidence)
- Traffic and pedestrian conflict points (safety analytics)
- Restricted areas — plant rooms, track beds, hazardous zones
What we configure
- Plain-English density, intrusion, and zone rules per site and schedule
- CamEdge in-jurisdiction inference — video never crosses the border
- Escalation paths for control rooms, security, and maintenance teams
- CamCore evidence records for enforcement, claims, and public reporting
Success metrics
- Faster time-to-awareness for surge, intrusion, and safety events
- Documented asset-condition and vandalism records with evidence
- A sovereignty architecture your legal and security teams have verified
Prefer to build the case yourself first? Four self-serve tools, no signup required:
ROI Calculator
A savings estimate seeded with public infrastructure defaults — tune it to your numbers.
Use-Case Library
Every rule we run in public infrastructure, with plain-English examples.
Policy Pack Generator
Draft camera policies and SOPs for your jurisdictions as a branded PDF.
Pilot Planner
Scope cameras, sites, use cases, and deployment model in minutes.
FAQ
Frequently asked questions
Answers to the questions public infrastructure teams ask most about deploying Camnitive — from camera requirements to compliance evidence.
Yes — sovereignty is the design center. CamEdge processes video in-jurisdiction, the AI explanation layer runs on-prem, and CamCore can be hosted entirely inside your infrastructure. No video, events, or metadata need to cross a border.
Density and flow analytics are aggregate and anonymous. Facial recognition and biometric identification are deliberately excluded from the platform — which keeps deployments inside EU AI Act boundaries and national privacy law, and defensible in public debate.
Yes. Rules are defined once as templates and rolled out per site with local zone adjustments, and CamCore gives operators one governed view across the network — same policies, same evidence standard, every site.
Every intrusion, vandalism, and safety event is sealed with a timestamp, annotated clip, and AI-written narrative — a chain-of-custody-conscious record that supports enforcement action, claims, and public accountability reporting.
Yes. Visual-anomaly rules on existing cameras flag damage, debris, and deterioration on bridges, stations, and public assets between physical inspections — targeting crews where evidence shows they are needed.
Most agencies scope 2–3 representative sites and 20–50 cameras, evaluated over a defined period on detection precision, evidence quality, and sovereignty compliance — with the architecture documentation provided up front for security review.
Intelligent Facilities
More in this pillar
Occupancy, security, and service quality in the buildings people move through.
Deployed in days. Resident in-country. Auditable end-to-end.
On the cameras you already own. Start with a 10–50 camera pilot, see measurable ROI in weeks, and grow it into your operations system of record.
Certified System IntegratorsTelco White-LabelVMS EcosystemsOEM Installed Base