The platform edge is watched by nobody
Yellow-line crossings and track intrusion happen constantly — staff learn about them from the driver’s emergency brake.
Logistics & Mobility
Railways & Public Transit Solutions
Governed visual intelligence for rail and transit networks: platform-edge and track-intrusion detection, level-crossing safety, crowd density, and trackside-worker protection — on the cameras your stations and depots already run, with data that never leaves your network.
Why now
The problems your cameras already see
Level crossings generate risk you cannot see
Vehicles stopping on crossings and barrier violations are systemic — but untracked, so nothing changes.
Trackside workers depend on paper possession rules
Possession limits and PPE rules for maintenance crews are enforced by briefings, not by anything watching the track.
Seconds
to detect track intrusion
alerts to station staff and signallers
30–50%
fewer possession-zone violations
typical pilot target
Minutes
to sealed incident evidence
for police, claims, and investigations
Typical pilot targets agreed with railways & public transit teams before deployment — measured on your cameras, in your environment.
Use cases
What you can run on day one
Every use case runs on the cameras you already own — deployed in days, governed by deterministic rules, and backed by sealed, audit-grade evidence.
Platform-edge & track intrusion
Instant alerts when people cross the yellow line or enter the track bed.
Level-crossing safety
Vehicles and pedestrians on crossings detected and trended at every barrier.
Crowd density & surge
Live platform and concourse occupancy with surge detection at peak times.
Trackside-worker protection
PPE verification and exclusion-zone enforcement during possessions and maintenance.
Depot & rolling-stock safety
Vehicle–person separation and movement discipline across depots and sidings.
Station security & evidence
Intrusion, vandalism, and incident records sealed for police and claims.
See a rule in plain English
Pick a use case and watch the rule that runs it — this is the entire configuration. No training data, no data-science team.
Railways & Public Transit · rule editor
STATION STAFF PAGED · CLIP SEALED ✓Live in seconds — no training data, no model tuning.
Deployment
From your cameras to governed evidence
Connect existing cameras
CamEdge runs on-prem GPU inference against your current CCTV — no rip-and-replace, resilient to limited connectivity.
Write rules in plain English
A deterministic rules engine enforces your policies — updated in minutes as operations change, with zero model retraining.
Act on sealed evidence
Every event lands in CamCore with an annotated clip and AI-written explanation — routed to your teams, ready for auditors.
In railways & public transit: Trackside and station cameras on one platform — sovereign or fully on-premises deployment for national networks.
Compliance
Built for the rules you answer to
Camera AI in railways & public transit sits under real regulatory obligations across the GCC, ASEAN, and the EU. Camnitive is designed to satisfy them — with evidence, not assurances.
EUAI governance
EU AI Act
Regulation (EU) 2024/1689
High-risk rules enforceable Aug 2, 2026
The Conformity Pack maps every applicable obligation to platform evidence — sealed logs, model documentation, oversight workflows — with a live conformity score in the dashboard.
EUCritical infrastructure & cyber
NIS2 Directive
Directive (EU) 2022/2555
CamEdge runs on your network segment, air-gap ready, with no inbound cloud dependency — camera analytics without expanding your attack surface.
EUData protection
GDPR
Regulation (EU) 2016/679
Processing stays on-premises, no biometrics by default, retention is policy-driven, and DPIA-ready documentation ships with the Conformity Pack.
EUVideo surveillance
EDPB Video Devices Guidelines
EDPB Guidelines 3/2019
Every rule is scoped to a declared purpose, evidence access is role-based and audit-logged, and retention is enforced automatically.
ASEANCritical infrastructure & cyber
Singapore Cybersecurity Act
Cybersecurity Act 2018 (CII regime)
On-prem analytics on a segregated segment — no new external dependencies on CII networks.
ASEANWorkplace safety
Workplace Safety and Health Act
WSH Act (Cap. 354A)
Continuous enforcement of PPE, zones, and vehicle rules with sealed evidence that stands up in WSH investigations.
Railways & Public Transit
Recommended Pilot Package
Start with 10–50 of your existing cameras, prove value in weeks, and grow the same deployment into your operations system of record.
Pilot goal
Prove platform-edge, track-intrusion, and crowd-density detection at 2–3 stations or one depot — on your existing station CCTV, with evidence aligned to rail-safety reporting.
Suggested scope
- Platform edges and track beds (intrusion and person-on-track detection)
- One level crossing (vehicle and pedestrian behavior at barriers)
- Concourses and platforms (crowd density and surge at peaks)
- Depot or trackside work zones (PPE and exclusion enforcement)
What we configure
- Plain-English platform, crossing, and possession rules with timetable-aware schedules
- CamEdge on-prem inference inside your network — video never leaves it
- Escalation to station control, signalling, and security by severity
- CamCore evidence records aligned to rail-safety and regulator reporting
Success metrics
- Faster time-to-awareness for track intrusion and platform-edge events
- Crowd-density baselines and surge alerts at pilot stations
- Sealed evidence for every safety and security exception in scope
Prefer to build the case yourself first? Four self-serve tools, no signup required:
ROI Calculator
A savings estimate seeded with railways & public transit defaults — tune it to your numbers.
Use-Case Library
Every rule we run in railways & public transit, with plain-English examples.
Policy Pack Generator
Draft camera policies and SOPs for your jurisdictions as a branded PDF.
Pilot Planner
Scope cameras, sites, use cases, and deployment model in minutes.
FAQ
Frequently asked questions
Answers to the questions railways & public transit teams ask most about deploying Camnitive — from camera requirements to compliance evidence.
Yes. Camnitive runs on your existing station, platform, and depot CCTV (standard RTSP) — no rip-and-replace. CamEdge processes video on-prem inside your network, which suits rail cybersecurity and data-residency requirements.
Detection runs on-prem with millisecond inference, so person-on-track and platform-edge events reach station control in seconds — with an annotated frame attached so controllers can verify before stopping traffic.
Yes. Every rule supports schedules: track beds can be hard-enforced during service hours and relaxed during authorized possessions, and crossing rules can differ by peak and off-peak — updated in minutes, no model retraining.
Density and surge rules run per platform and concourse zone, giving station staff live occupancy and early warning before crowding becomes dangerous. Analytics are anonymous and policy-based — no facial recognition, which is deliberately excluded from the platform.
Every event is sealed with a timestamp, annotated clip, and an AI-written explanation in your own operating-policy language. CamCore assembles these into records for safety investigations, regulator reporting, and police evidence requests.
Yes. PPE verification and exclusion-zone enforcement run on depot and worksite cameras during possessions — keeping people, plant, and live tracks provably separated, with every exception documented.
Logistics & Mobility
More in this pillar
Flow, safety, and security wherever goods, vehicles, and people move.
Deployed in days. Resident in-country. Auditable end-to-end.
On the cameras you already own. Start with a 10–50 camera pilot, see measurable ROI in weeks, and grow it into your operations system of record.
Certified System IntegratorsTelco White-LabelVMS EcosystemsOEM Installed Base