Forklift near-misses never make the report
The incidents you record are a fraction of the conflicts that happen — the pattern stays invisible until someone is hurt.
Warehousing Solutions
Forklift/person proximity, dock utilization, aisle safety — plus congestion and yard visibility analytics on the cameras already covering your sheds.
Why now
The problems your cameras already see
Blocked exits are found at audit time
Egress routes and aisles drift blocked during every peak — discovered by inspectors, not by your team.
Ops metrics come from clipboards
Dock dwell, door utilization, and congestion are measured by walking the floor — sampled, stale, and disputed.
5–10×
more near-misses surfaced
forklift–pedestrian conflicts trended per zone
30–50%
fewer egress and aisle violations
typical pilot target
Live
dock and yard metrics
dwell and utilization from existing cameras
Typical pilot targets agreed with warehousing teams before deployment — measured on your cameras, in your environment.
Use cases
What you can run on day one
Every use case runs on the cameras you already own — deployed in days, governed by deterministic rules, and backed by sealed, audit-grade evidence.
Forklift–pedestrian proximity
The highest-severity warehouse risk, watched continuously.
Blocked exits & aisles
Egress and aisle discipline enforced automatically.
Dock utilization
Dwell time and door utilization measured from existing cameras.
Congestion heatmaps
Find the choke points slowing your shifts.
After-hours intrusion
Perimeter and interior security when the site sleeps.
Yard visibility
Trailer, gate, and yard state without a yard walk.
See a rule in plain English
Pick a use case and watch the rule that runs it — this is the entire configuration. No training data, no data-science team.
Warehousing · rule editor
SUPERVISOR PAGED · CLIP SEALED ✓Live in seconds — no training data, no model tuning.
Deployment
From your cameras to governed evidence
Connect existing cameras
CamEdge runs on-prem GPU inference against your current CCTV — no rip-and-replace, resilient to limited connectivity.
Write rules in plain English
A deterministic rules engine enforces your policies — updated in minutes as operations change, with zero model retraining.
Act on sealed evidence
Every event lands in CamCore with an annotated clip and AI-written explanation — routed to your teams, ready for auditors.
In warehousing: Runs against your existing VMS across DCs — one CamEdge appliance per ~12 cameras, live in days.
Compliance
Built for the rules you answer to
Camera AI in warehousing sits under real regulatory obligations across the GCC, ASEAN, and the EU. Camnitive is designed to satisfy them — with evidence, not assurances.
EUAI governance
EU AI Act
Regulation (EU) 2024/1689
High-risk rules enforceable Aug 2, 2026
The Conformity Pack maps every applicable obligation to platform evidence — sealed logs, model documentation, oversight workflows — with a live conformity score in the dashboard.
EUWorkplace safety
EU OSH Framework Directive
Directive 89/391/EEC
Continuous PPE, zone, and proximity enforcement with sealed evidence — prevention you can demonstrate, not just declare.
EUData protection
GDPR
Regulation (EU) 2016/679
Processing stays on-premises, no biometrics by default, retention is policy-driven, and DPIA-ready documentation ships with the Conformity Pack.
ASEANWorkplace safety
Workplace Safety and Health Act
WSH Act (Cap. 354A)
Continuous enforcement of PPE, zones, and vehicle rules with sealed evidence that stands up in WSH investigations.
ASEANWorkplace safety
Malaysia OSHA
OSHA 1994 (2022 amendment)
Camera-based hazard monitoring turns your risk assessments into continuously enforced, evidenced controls.
GCCWorkplace safety
UAE OSH Requirements
MoHRE resolutions & OSHAD (Abu Dhabi)
Continuous safety-rule enforcement with sealed evidence — inspection-ready records without manual reporting.
Warehousing
Recommended Pilot Package
Start with 10–50 of your existing cameras, prove value in weeks, and grow the same deployment into your operations system of record.
Pilot goal
Prove detection quality and evidence-grade reporting in one facility, on your existing cameras — no model training, no rip-and-replace, live in days.
Suggested scope
- Forklift–pedestrian conflict points in aisles and crossings
- Dock doors and staging for utilization and turnaround
- Fire exits and emergency egress routes
- Perimeter and after-hours exception zones
What we configure
- Your safety policies written as plain-English rules — no per-site model tuning
- CamEdge on-prem inference, so video never leaves your facility
- AI explanations that narrate each event in your own policy language
- Alert routing to shift leads and safety managers, with audit-ready reporting in CamCore
Success metrics
- Measurable reduction in proximity conflicts and blocked-exit incidents
- AI Copilot for labor efficiency, congestion analytics, and yard visibility
- Conformity packs for EU AI Act, Saudi PDPL residency, and brand ESG audits
Prefer to build the case yourself first? Four self-serve tools, no signup required:
ROI Calculator
A savings estimate seeded with warehousing defaults — tune it to your numbers.
Use-Case Library
Every rule we run in warehousing, with plain-English examples.
Policy Pack Generator
Draft camera policies and SOPs for your jurisdictions as a branded PDF.
Pilot Planner
Scope cameras, sites, use cases, and deployment model in minutes.
FAQ
Frequently asked questions
Answers to the questions warehousing teams ask most about deploying Camnitive — from camera requirements to compliance evidence.
Alerts tell you something happened; Camnitive proves what happened. Every forklift-proximity event, blocked exit, or dock exception becomes a timestamped, evidence-grade record with an AI-written explanation in your own policy language — ready for regulators, insurers, and brand auditors.
No rip-and-replace. CamEdge runs on-prem GPU inference against the cameras you already own — the only requirement is accessible video streams. Mixed camera fleets across sites are the norm, not a problem.
Pilots of 10–50 cameras deploy in days, not weeks. There is no per-site model tuning and no training data collection: you write your safety and operations policies as plain-English rules, and the deterministic rules engine enforces them from day one.
Inside your sovereign envelope. CamEdge processes video on-prem, and CamCore — the system of record dashboard — can run in the cloud or fully in-country. That architecture is built for the EU AI Act and GDPR, GCC data-protection laws such as the Saudi and UAE PDPL, and ASEAN privacy laws like Indonesia's PDP and Singapore's PDPA.
Most start with forklift/pedestrian proximity, dock utilization, aisle safety, and blocked-exit detection. From there they add labor efficiency, congestion analytics, and yard visibility using the AI Copilot and analytics packs.
Yes. CamCore lets you define rule templates once and roll them out network-wide, with site-level zone adjustments for layout differences — so operations, safety, and compliance teams report against one consistent standard.
3PL operators use compliance scorecards as client-facing proof of duty of care — evidence per site, shift, and zone rather than self-reported numbers. Insurers see documented, continuous risk reduction on forklift-pedestrian proximity and egress compliance instead of finding out after a claim.
Logistics & Mobility
More in this pillar
Flow, safety, and security wherever goods, vehicles, and people move.
Deployed in days. Resident in-country. Auditable end-to-end.
On the cameras you already own. Start with a 10–50 camera pilot, see measurable ROI in weeks, and grow it into your operations system of record.
Certified System IntegratorsTelco White-LabelVMS EcosystemsOEM Installed Base